Filavia Bagno 17 oz Spray

Concentrated bathroom spray cleaner which brings back the shine on all bathroom surfaces.

•  Deep-down cleaner for all bathroom surfaces.
• Removes limescale.
• Gives surfaces back their shine.

Application:

Spray onto surfaces, holding the bottle vertical about 15 cm from surface to be cleaned.  Leave to act then clean with an absorbent cloth.

Filabrio 17 oz Spray Universal Cleaner

Universal Spray Cleaner ideal for kitchen and bathroom cabinet doors, office furniture, and more.

• Cleans all surfaces: wall claddings, ceramic tiles, plastic laminates, glazed surfaces, stainless steel, glasses and mirrors.
• Ideal for kitchen and bathroom cabinet doors, office furniture and laminated
  surfaces.
• Perfect for polished marble tops.

Application:

Spray onto surfaces, holding the bottle vertical about 15 cm from surface to be cleaned. Clean with a soft, dry cloth.

Fila Cleaner 1 & 5 LT Neutral

A gentle, universal floor cleaner safe for pretreated and sensitive surfaces

• A gentle detergent for all floors
• Safe for pretreated and sensitive surfaces.
• Essential for after installation cleaning of acid sensitive material such as polish natural stone or polish agglomerates.

Application: 

1. Maintenance: dilute to 1:200 and clean the surface with a cloth or an electric floor cleaner. Does not require rinsing.
2. For very dirty floors, dilute to 1:30-1:50, then clean the surface with a cloth and scrubbing brush. Remove dirt and rinse.
3. For after installation cleaning, dilute 1:30 and spread with a single-disc professional cleaner with a soft disc (white or beige) or a floor scrubbing brush. Remove the residue with a vacuum drier or cloths.   Rinse thoroughly.

Dilution and Coverage
With one litre:
Maintenance 1:200 1500 m2
Init. Cleaning of stone 1:30 50 m2

Deterdek 1 LT Acid Cleaner

Acid descaling floor cleaner that removes things like rust stains, grout residues, lime deposits, and more.

• Removes all grout residues and building-site dirt.
• Eliminates any saline efflorescences from terracotta.
• Removes lime deposits from floors, wall tiles (showers), and bathroom fixtures.
• Penetrating cleaner for outdoor paving.
• All-in-one descaler and detergent: contains high concentrations of surfactants.
• Removes rust stains.

Application:

1. Spread with a single-disc professional cleaner or rag and leave to act for a few
   minutes.
2. Clean using a single-disc professional cleaner fitted the most appropriate disc
   (e.g.: brown for terracotta) or with a floor cleaning brush.
3. Vacuum or wipe up residue.
4. Rinse with plenty of clean water.

Fila Marble Restorer Kit

Marble Restoration Kit: Removes acid-caused stains and restores shine on small marble, travertine stone and agglomerate surfaces.

The Kit Contains

1. Fila MarbleOne yellow metallic pad.
2. Fila MarbleTwo white resin pad.
3. Fila MarbleThree blue resin pad.
4. Fila Marble Sponge (white polishing pad).
5. Fila MarbleShine, marble polish - 200 ml.
6. Fila Formula Marmo, marble finishing polish - 250 ml.
7. Gloves.

Fila Fuganet 17 oz Grout Spray

Deep-down cleaner for grouts in ceramic tile floors and walls. Suitable for single fired, double fired, porcelain tiles.  Unsuitable only for porous surfaces treated with wax.

Application:

1.  Spray the product directly onto the grouting to be cleaned.
2. Leave to act.
3. Scrub with an abrasive sponge or scrubbing brush.
4. Rinse thoroughly. If grout joints are very dirty, they should first be clean with a 1:10 dilution of Deterdek.

Fila No Spot

Removes oily and greasy stains from terracotta, quarry tiles, natural stone, granite, agglomerates, tumbled marble, pebbles, cobblestones, concrete.

Do not dilute: ready to use.
 
Application:

1. Spray at a distance of 15 cm, keeping the can at an angle of approx. 45°.
2. Leave to dry for a few minutes. It absorbs grease deposits and then dries, leaving a thin layer of white powder on the floor.
3. Remove with a brush.
4. Wipe with a wet cloth.

Repeat application if traces remain.

Fila PS/87 1 LT Stain Remover

Degreasing cleaner and wax remover Ideal for basic cleaning of acid sensitive stone and basic cleaning of concrete.

• Diluted: cleans and removes grease from dirty porcelain stoneware, ceramic,
  natural stone, terracotta and concrete floors.
• Undiluted: removes stubborn stains from porcelain stoneware. It is excellent for basic cleaning of acidsensitive stone.
• Ideal for basic cleaning of concrete.
• Wax remover for water based, metal or polishing wax.

Dilution: depending on use
To clean all surfaces:
Dilute 1:10 to 1:20 and apply to the surface. Leave to act for a few minutes then clean with a single-disc professional cleaner or a scrubbing brush. Vacuum or wipe up dirt and then rinse with plenty of water.
For a deeper clean, dilute to 1:5.
To remove stains from porcelain stoneware
Pour undiluted directly onto the mark and over the entire surface of the tile. Allow to dry completely, then wash and rinse.
To remove wax:
Dilute 1:5, spread and leave to act for a few minutes. Scrub with a scrubbing brush or a single-disc cleaner.  Vacuum or wipe up dirt and then rinse
with plenty of water.
To remove epoxy grout residues:
Apply the product undiluted, leave to act for 15-20 minutes, scrub with an abrasive disc, then rinse.

DILUTION AND COVERAGE
With one litre:
Maintenance: 1:20 200 m2
Wax remover 1:5 20 m2
Init. Cleaning of Stone 1:5 30 m2

Fila-Smuffy 17 oz Mould and Mildew Remover

• Removes mould from walls and claddings.
• Acts against the build-up of organic substances: algae, moss, etc.

Application:

1.Spray product directly onto the surface to be cleaned.
2.Leave to act for about 15 minutes.
3.Rinse with a damp, clean cloth.
4.To prevent mould from forming again we recommend a further application of NoAlgae after FilaSmuffy.

Fila SR/95 2.5 oz Stain and Spot Remover for Porcelain

Removes coloured organic stains: wine, soft drinks, coffee, tea, etc.

Do not dilute: ready to use.

Application:

1. Shake the can before use. Apply on the stain, ensuring it is completely covered.
2. Leave until the stain has completely disappeared.
3. Remove residue with a sponge.

For extremely stubborn stains on marble surfaces it is necessary to remove the product before it dries completely and then repeat the operation.

Filamarmo 8 oz Marble Polish

• Cleans and protects small surfaces in marble, granite and agglomerate: shelves, windowsills, tables, bathroom tops, etc.
• Removes the limescale residues left by water.
• Restores the shine to worn polished surfaces.

No dilution: ready for use.

Application:

1. Shake before use. Pour the product onto a cloth and wipe it over the surface. Rub for a few seconds until completely dry.

FugaProof 17 oz grout sealer

• Prevents absorption of stains.
• Makes dirt removal easier.
• Ideal for mosaics.
• Keeps tile joints looking new for years.

No dilution: ready to use

Application:

1. Apply directly to the grout joints using the special spout.
2. Spread evenly with a small paintbrush.
3. Leave to dry for a few hours then the surface will be ready to walk on again.

Any spillage of the product onto nearby tiles should be removed immediately using a paper towel or a clean cloth.
The product may be applied to the tiles with a paintbrush. For easier application pour a sufficient quantity into a suitable container.

FilaFob 1 Liter Stain Protection Agent

• Stain protection agent for internal and external surfaces.
• Protective basecoat for waxed internal surfaces with rustic or rough finishes.

Do not dilute: Ready to use.

Application:

For treatment of exterior pavings: apply a first coat of Hydrorep (for natural stone) or Fila ES/82 (for terracotta) to the dry paving. The following day, brush on an even, continuous coat of Filafob.
For indoor use, apply Filafob with a large brush. The following day,apply one or two coats of the most suitable protective product (FilaJet, FilaMatt, FilaSatin, FilaLongLife)

Maintenance:
diluted solution of FilaCleaner
Coverage:
With one litre:
Terracotta 5/10 m2
Stone 10/20 m2

MP/90 250 ML/ 1 LT sealer for Porcelain

• The best stain protection for polished marble, granite and porcelain stoneware.
• Anti-graffiti treatment for vertical walls in natural stone.
• Ideal for protecting tables, bathroom tops and kitchen counters.

No dilution: ready to use.

Application:

1. For protecting porcelain tiles and polished natural stoneware: Use a flat brush to spread an even coat of Fila MP/90onto a clean and dry surface.

2. After 24 hours, when the floor is dry, remove the excess using a single-disc professional cleaner (white or beige disc) or a household polisher fitted with felt pads.
3. Stubborn residues can be removed with a cloth dipped in FilaSolv.

Maintenance:
diluted solution of FilaCleaner.
Coverage
With one litre:
Stone 30 m2
Porcelain stoneware 30/40 m2

Fila StonePlus Color Enhancer 250 ml/ 1 LT

• Protects and enhances the original colour of polished, honed, rough and tumbled natural stone.
• Penetrates deeply into the material, protecting it from water and oily stains and dirt.
• Ideal for windowsills, tops, rosettes, inset decorations. Perfect for interior and exterior surfaces.

No dilution: ready to use

Application:

1. Using a paintbrush, a sponge or other applicator, apply Fila StonePlus to a clean, dry surface.
2. During the application rub the surface with a sponge or a cloth to help the penetration of the product and the removal of any excess.
3. The surface can be walked on after only eight hours.
4. For a deeper colour, repeat procedure, waiting at least 8 hours between each application.

Maintenance:

diluted solution of FilaCleaner

Coverage:

With one litre:

Polished stone 50 m2

Rustic stone 20/25 m2